A. Zarezadeh; S.R. Tabaei aghdaei; A. Mirhosseini; M.R. Arabzadeh; L. Mirjani
Abstract
Satureja belongs to lamiaceae with different species throughout the world. Annual and perennial species of this medicinal plant grow naturally in Iran, of which nine species are endemic. In this research, perennial species of Iranian savory were evaluated during 2009-2013, Yazd, Iran. Accessions of different ...
Read More
Satureja belongs to lamiaceae with different species throughout the world. Annual and perennial species of this medicinal plant grow naturally in Iran, of which nine species are endemic. In this research, perennial species of Iranian savory were evaluated during 2009-2013, Yazd, Iran. Accessions of different species were cultivated at Research Station of Medicinal Plants using a randomized complete block design. Different traits including percentage of plant establishment, plant height, plant canopy diameter, shoot fresh yield, shoot dry yield and oil content were measured. Variance analysis showed significant differences (p<0.01) among accessions for plant establishment, plant canopy diameter, plant height, essential oil percentage, shoot dry yield and leaf dry yield . Based on mean comparisons, SKM (Satureja bachtiarica) from Yazd, 107 (S. spicigera) from Gilan, 15 (S. rechingeri) from Ilam, 123-1 and 123-2 (S. mutica) from Khorasan province were superior accessions for valuable agronomic traits such as percentage of establishment, shoot yield and oil content.
M.T. Darzi; A. Akhani
Abstract
This research was aimed to study the effects of biofertilizer and plant density on yield and essential oil of coriander (Coriandrum sativum L.). The traits including 1000-seed weight, biological yield, seed yield, essential oil content, and essential oil yield were measured in a factorial experiment ...
Read More
This research was aimed to study the effects of biofertilizer and plant density on yield and essential oil of coriander (Coriandrum sativum L.). The traits including 1000-seed weight, biological yield, seed yield, essential oil content, and essential oil yield were measured in a factorial experiment based on a randomized complete block design with twelve treatments and three replications. The study was conducted at the research field of Agriculture Company of Ran, Firouzkuh, Iran in 2011. The factors were nitroxin biofertilizer at four levels (non-inoculated, inoculated seeds, spraying on the plant at stem elongation stage and inoculated seeds+spraying on the plant at stem elongation stage) and plant density at three levels (12.5, 16.7 and 25 plants m-2). Results showed that the highest 1000-seed weight, biological yield, seed yield, essential oil content, and essential oil yield were obtained from nitroxin inoculation with seeds together spraying on the plant at stem elongation stage. Plant density also showed significant effects on the mentioned traits, as the highest biological yield, seed yield and essential oil yield were obtained in a density of 25 plants m-2 and the maximum essential oil content was recorded in a density of 16.7 plants m-2. According to the results of this study, two- time consumption of nitroxin biofertilizer and a density of 25 plants m-2 were identified as the most suitable treatment.
A. Faraji; B. Esmailpoor; F. Sefidkon; B. Abaszadeh; K. Khavazy
Abstract
In order to investigate the effect of salicylic acid and putrescine as foliar spray on plant yield and growth, essential oil yield and composition of summer Savory (Satureja hortensis L.), a field experiment was carried out based on randomized complete blocks design (RCBD), with three replication. ...
Read More
In order to investigate the effect of salicylic acid and putrescine as foliar spray on plant yield and growth, essential oil yield and composition of summer Savory (Satureja hortensis L.), a field experiment was carried out based on randomized complete blocks design (RCBD), with three replication. Different concentrations of salicylic acid (0, 1, 2 and 3mM) and putrescine (0, 0.5, 1, 1.5 and 2mM) were applied as foliar spray at early stages of shooting, blooming and floweing. Results showed that foliar application of salicylic acid and putrescine had significant effect (p<0.01) on some vegetative parameters such as dry weight and yield of total aerial shoots, leaves and inflorescences as well as total chlorophyll concentration. All treatments had a significant effect (p<0.01) onessential oil efficiency, percentage, yield and composition of Satureja hortensis. The highest value of total aerial shoots dry weight (45.63g/p), total aerial shoots yield (5070kg/ha), leaf dry weight (6.39g/p), leaf yield (710kg/ha), inflorescence dry weight (15/65g/p), inflorescence yield (1739kg/ha), and total chlorophyll concentration (1.46mg/l) were observed in 3mM salicylic acid. The essential oil efficiency (2.35kg/ha) and essential oil yield (76.76%) reached a maximum range in 1.5mm putrescine. The concentration of thymol (47.76%) as the main volatile component of summer savory, reached the highest value in 2mM salicylic acid while other components, such as α-pinene, limonene and E-B-ocimene, reached the highest value in 50mg/L putrescine.
M. Foaadedini; M.J. Seghatoleslami; S.Gh. Moosavi
Abstract
In order to study the effect of drought stress and planting date on some traits of chichory (Cichorium intybus L.), an experiment was conducted in a split plot design using randomized complete blocks design with three replications at the Agricultural Research Center of Islamic Azad University, Birjand ...
Read More
In order to study the effect of drought stress and planting date on some traits of chichory (Cichorium intybus L.), an experiment was conducted in a split plot design using randomized complete blocks design with three replications at the Agricultural Research Center of Islamic Azad University, Birjand Branch in 2011-2012. The factors included were irrigations levels (%100, %75, %50 and %25 ET0) and planting date (16 March, 2 April and 26 April). Results showed that all traits were significantly affected by drought stress, except R/S. The highest plant height, root length, width and branches number, shoot dry yield, root dry yield, total dry biomass, R/S were achieved under %100 ET0 and the highest water productivity was achieved under %25 ET0. According to mean comparisons, the highest values for all traits, except R/S, were recorded for the planting date of 16 March. The interaction effects of factors were also significant for branches number, stem dry yield, shoot dry yield, root dry yield and water productivity. Totally, the highest yield and water productivity were obtained for the planting date of 6 March. In addition, no significant difference was recorded between the treatments of %50 ET0 and %100 ET0 in 16 March in terms of total dry biomass. Therefore, %50 ET0 could be recommended especially in water deficit condition.
M. Dashti; M. Mirza; M. Kafi; H. Tavakkoli
Abstract
The effects of water deficit on yield, essential oil contents and composition of Noroozak (Salvia leriifolia Benth.) were investigated at Khorasan-e-Razavi Agricultural and Natural Resources Research Center, Mashhad-Iran. The treatments were deficit irrigation based on actual evapotranspiration (ETc) ...
Read More
The effects of water deficit on yield, essential oil contents and composition of Noroozak (Salvia leriifolia Benth.) were investigated at Khorasan-e-Razavi Agricultural and Natural Resources Research Center, Mashhad-Iran. The treatments were deficit irrigation based on actual evapotranspiration (ETc) at the rate of 100% (fully irrigated), 66.6% (moderate stress), 33.3% (severe stress) and non-irrigated (control). The experiment was analyzed in a randomized complete block design with three replications. Results indicated that the essential oil percentage of green leaves and flowering stem in severe stress and control was significantly (P≤0.05) higher than that of fully irrigated treatment. The highest and lowest dry matter yields were obtained in fully irrigated and control treatments, respectively. Severe deficit (P≤0.05) decreased the essential oil yield significantly but it was not affected in moderate stress. Results also showed that 1, 8-cineol, β-pinene and borneol were the main essential oil constituents in all water deficit treatments, included nearly 50% of total essential oil contents. The above essential oil constituents in control treatment increased by 21.1%, 7% and 15.3% in green leaves and 39%, 12% and 55% in flowering stems in comparison with fully irrigated treatment. However cedren-13-ol and δ-cadinene decreased by 58.5% and 46% in green leaves and 52% and 14% in flowering stems, respectively.
Sh. Sharafaldin Shirazi; F. Fazeli
Abstract
Thyme, a perennial species from Lamiaceae family, is a valuable medicinal plant in the world. Thymus daenensis Celak. is distributed in many parts of Iran. In order to investigate the effect of micro-chelate iron and iron sulfate on stem length, crown cover, biomass yield, dry matter yield, and absorption ...
Read More
Thyme, a perennial species from Lamiaceae family, is a valuable medicinal plant in the world. Thymus daenensis Celak. is distributed in many parts of Iran. In order to investigate the effect of micro-chelate iron and iron sulfate on stem length, crown cover, biomass yield, dry matter yield, and absorption rate of N, P, K, and Fe in leaves, a factorial experiment in a randomized complete block design with three replicates was conducted. The study was performed in Homand Rangeland Research station in 2012. Three levels of micro-chelate iron (0, 3, and 6 kgha-1) and iron sulfate (3 and 6 kg in 1000 liters of water per square meter) at three stages. Results of analysis variance showed that the effect of different amounts of fertilizers on stem length (p≤0.05), biomass yield and dry matter yield (p≤0.01) were significant (28.63 cm, 5110 and 2613kg.h-1). The interaction of two above fertilizers on crown cover (47.81 cm2), absorption rate of N, P, K, Fe in leaves were significant (p≤0.01). The highest absorption rate of N was P, K and Fe were 1.1%, 1.14, 15.9, and 1.70 g.kg-1, respectively. Therefore, nano iron chelate at 6kg.ha-1 could be recommended.
S. Nasirzade; S. Fallah; Sh. Kiani; A. Mohammadkhani
Abstract
In order to investigate the response of quantitative and qualitative characteristics of isabgol (Plantago ovata Forssk.) to different levels of cow manure and nitrogen fertilizers, an experiment was conducted in a randomized complete blocks design with four replications at the research farm, Shahrekord ...
Read More
In order to investigate the response of quantitative and qualitative characteristics of isabgol (Plantago ovata Forssk.) to different levels of cow manure and nitrogen fertilizers, an experiment was conducted in a randomized complete blocks design with four replications at the research farm, Shahrekord University in 2011. Treatments consisted of: control (no fertilizer) and three levels of nitrogen fertilizer (30, 60 and 90 N/ha in the form of urea) and three levels of cow manure (14.29, 28.58 and 42.78 Mg/ha). Results showed that there were no significant differences in quantitative and qualitative characteristics between cow manure and urea fertilizer applications. The highest grain yield and aboveground biomass (1618 and 9464 kg/ha, respectively) were observed in 90 kg N/ha from urea fertilizer, but it had no significant difference with that of the 42.87 Mg/ha of cow manure. The application of 42.87 Mg/ha of cow manure resulted in the greatest seed mucilage amount (%26.75), swelling factor (10.38 ml) and mucilage yield (415 kg/ha), but swelling factor and mucilage yield of this treatment had no significant difference with that of the 90 kg N/ha from urea fertilizer. In general, it is concluded that the use of cow manure in isabgol production, not only does not reduce grain and mucilage yield of isabgol but also it can produce high- mucilage seeds, resulting in reduced pollution caused by the use of chemical fertilizers.
N. Raesee; S.M.A. Vakili; G. Sarhady; F. Torkynegad
Abstract
This research was aimed to investigate the effects of different levels of manure, iron and zinc fertilizers on yield, yield components and essential oil percentage of cumin (Cuminum cyminum L.) in Jiroft during 2012-2013. The study was performed as factorial in a randomized complete blocks design with ...
Read More
This research was aimed to investigate the effects of different levels of manure, iron and zinc fertilizers on yield, yield components and essential oil percentage of cumin (Cuminum cyminum L.) in Jiroft during 2012-2013. The study was performed as factorial in a randomized complete blocks design with three factors and 18 treatments in three replications. Manure at two levels of zero and 150 ton ha-1, zinc sulfate at three levels of 0, 25, and 40 kg ha-1and iron fertilizer at three levels of 0, 2.5, and 5 kgha-1 were applied. In this study, plant responses consisted of yield, shoot dry weight, plant height, number of seeds per plant, number of umbels, and 1000-seed weight. Results showed that manure, iron and zinc fertilizers at different levels affected shoot dry weight, yield, number of seeds per plant, number of umbels, plant height, 1000-seed weight, and essential oil percentage significantly at 1% level of significance. In addition, the interaction effects of manure and iron and zinc fertilizers were significant on shoot dry weight, yield, number of seeds per plant, and 1000-seed weight. According to the obtained results, a combined treatment of manure (15 ton ha-1), zinc sulfate (25 kg ha-1) and iron fertilizer (5kg ha-1) could be recommended to enhance the yield and yield components of cumin in Jiroft.
A.A. Zarea; M.J. Malakouti; H.A. Bahrami; F. Sefidkon; R. Shahhosseini
Abstract
Lippia citriodora H. B. et K. is a valuable medicinal plant whose extract, as its main chemical composition, has active components such as Geranial and Limonene widely used in pharmaceutical, food, cosmetic and health industries. In medicinal plants, balanced fertilization using chemical and biological ...
Read More
Lippia citriodora H. B. et K. is a valuable medicinal plant whose extract, as its main chemical composition, has active components such as Geranial and Limonene widely used in pharmaceutical, food, cosmetic and health industries. In medicinal plants, balanced fertilization using chemical and biological inputs has great effect on yield and phytochemicals related to yield production. This study was conducted in the greenhouse of Tarbiat Modares University. In this experiment, seven treatments were performed in a completely randomized block design with three replications. The aim of this study was to investigate the effects of balanced fertilization and super-absorbent polymer on the chemical components and yield of Lippia citriodora. After planting and harvesting operations and growth performance measurements, essential oil was dehydrated by distilled water method using Clevenger and Sodium sulfate. Using gas chromatography and gas chromatography connected to spectrum, 15 compounds were determined in essential oil, consisting more than 90% of essential oil components. Results showed that there was a significant difference among treatments (p< 0.01). The lowest and highest fresh yield were related to control (6410 kg.ha-1) and balanced fertilization + bio-fertilizer + super-absorbent polymer (15435 kg. ha-1) treatments, respectively. The lowest and highest dry leaf yield were obtained in control (702 kg.ha-1) and balanced fertilization + bio-fertilizer + super-absorbent polymer (1503 kg. ha-1) treatments, respectively. The lowest and highest essential oil content was achieved in control (7.4 kg.ha-1) and balanced fertilization + bio-fertilizer + super-absorbent polymer (20.5 kg.ha-1) treatments, respectively. In terms of overall essential oil components, the minimum and maximum contents of Neral and Geranial were obtained in control and balanced fertilization treatments with 41.2% and 52.27%, respectively.
Gh. Marghaeizadeh; M.H. Gharineh; Gh. Fathi; A.R. Abdali; M. Farbod
Abstract
Seed priming includes very simple methods that could be effective in improving seed germination and establishment of seedling. Seed treatment with ultrasound waves and magnetic field are considered as biophysical and seed priming methods. The production and processing of this species in the world is ...
Read More
Seed priming includes very simple methods that could be effective in improving seed germination and establishment of seedling. Seed treatment with ultrasound waves and magnetic field are considered as biophysical and seed priming methods. The production and processing of this species in the world is of outmost importance regarding the medicinal effects of Carum copticum (Carum copticum (L.) C. B. Clarke), belonging to the Apiaceae family. This research was aimed to study the effects of ultrasound waves and magnetic field on germination of Ajowan in laboratory conditions at the University of Agriculture and Natural Resources of Ramin in 2010. In addition, increasing the percentage of seed germination and velocity, and increasing the resistance of seedlings to the environmental stresses such as drought, cold, heat, as well as diseases and pests were investigated. The seeds were treated with an ultrasound of 22 kHz frequency in two times of two and five minutes (U2, U3) and a magnetic field intensity of 5000 gauss in three different times of 15, 30, 45 minutes (M2, M3&M4) at a temperature of 30°C. A factorial experiment in a complete randomized design with four replications was carried out. Results showed that seed germination and vigor increased in response to the magnetic field and ultrasonic wave treatments. According to the obtained results, a magnetic field for 30 minutes and in some cases 45 minutes with ultrasound waves for five minutes had the greatest impact on this species. Despite the high sensitivity to both plant diseases and pests, no trace of disease and pest was found in the field.
M. Heidari; M. Mobasri Moghadam
Abstract
In order to study the effects of rate and time of nitrogen application on yield and yield components of karela (Momordica charantia L.), a field experiment as split plot design with three replications was conducted in 2011 at Research Center for Agriculture and Natural Resources of Sistan. The treatments ...
Read More
In order to study the effects of rate and time of nitrogen application on yield and yield components of karela (Momordica charantia L.), a field experiment as split plot design with three replications was conducted in 2011 at Research Center for Agriculture and Natural Resources of Sistan. The treatments consisted of three levels of nitrogen fertilizer, obtained from urea source, at the rate of N1=75, N2=150 and N3=225 kg N.ha-1 as main plot, and three time application including: T1=1/2 at 3 and 4 leaves and 1/2 before flowering, T2= 1/2 at 3 and 4 leaves and 1/2 after fruit to start and T3=1/3 at 3 and 4 leaves, 1/3 before flowering and 1/3 after fruit to start were used as sub plot. Results showed that nitrogen application had significant effect on the yield and amount of biomass production (p < 0.01) in karela. By increasing nitrogen level from 75 to 225 kg N.ha-1, yield and biomass values increased. The amount of yield increased about 63.1%. Nitrogen treatment had positive and significant effect on yield components including plant height, number of lateral branches, number of fruits per plant, number of seeds per fruit, the length and diameter of fruit. Timing of nitrogen application had only significant effect on yield, the amount of biomass production, number of fruits per plant, length and diameter of fruit. The maximum yield of karela was obtained at T2 treatment.
S.M. Moosavi; S.G.R. Moosavi; M.J. Seghatoleslami
Abstract
In order to study the effect of drought stress at different growth reproductive stages and N fertilizer rates on some morphological and quantitative traits and water use efficiency (WUE) of fennel(Foenicolum vulgare Mill.), an experiment was conducted as a split-plot based on a Randomized ...
Read More
In order to study the effect of drought stress at different growth reproductive stages and N fertilizer rates on some morphological and quantitative traits and water use efficiency (WUE) of fennel(Foenicolum vulgare Mill.), an experiment was conducted as a split-plot based on a Randomized Complete Block Design with three replications, at Research Field of Islamic Azad University of Birjand Branch in 2010. The main plot included irrigation at three levels (irrigation stop at start of flowering, and seed-filling stages, and optimum irrigation) and the sub-plot was N fertilizer at four rates (0, 60, 120 and 180 kg N/ha). Results showed that irrigation stop at start of flowering and seed-filling stages decreased plant height by 16.2 and 5.2%, fruit yield by 69.7 and 52.6%, essential oil yield by 72.9 and 31.4%, and WUE for essential oil production by 69.1 and 4.5%, respectively as compared to optimum irrigation treatment. Moreover, the increase in rate of nitrogen application from 0 to 120 kg N/ha significantly increased plant height, stem diameter, branch number of main stem and fruit yield, 5.8, 12, 15.5 and 24.3%, respectively. However, the highest yield and WUE for essential oil production was observed in 60 kg N/ha application treatment. In general, according to the results of current study, optimum irrigation with 60 kg N/ha application treatment can be recommended to achieve high essential oil yield of fennel in Birjand, Iran.
Z. Masumi; P. Zandi; S.R. Tabaei Aghdaei
Abstract
In order to identify the best genotypes of rose (Rosa damascene Mill.), a field experiment was conducted in a randomized completely blocks design with seven treatments and three replications. Flower number, flower fresh weight, yield, petal fresh weight, petal to flower fresh weight ratio, petal number, ...
Read More
In order to identify the best genotypes of rose (Rosa damascene Mill.), a field experiment was conducted in a randomized completely blocks design with seven treatments and three replications. Flower number, flower fresh weight, yield, petal fresh weight, petal to flower fresh weight ratio, petal number, flower diameter, flowering period, essential oil weight were investigated for seven genotypes of rose (Fars1, Fars2, Darab1, Darab2, Darab3, Estahban1, Meymand). Essential oil was obtained by distillation method and essential oil composition was determined by GC and GC/MS. Data analysis was performed by SAS and Jamp4. According to the results of mean comparisons, the highest yield and flower number were recorded for Darab1, Meymand and Fars2, while the highest amount of essential oil was obtained for Maymand and Fars2. A positive and significant correlation was also found between yield and flower number, leading to the increased essential oil. Citronellol, neral, and n-nonadecane were identified as the major components of the essential oil, respectively found in Darab1, Darab3, and Estahban1.
M. Mohammadpour; A. Ghasemnejad; M.H. Lebaschy; B. Abbaszadeh; M. Azadbakht
Abstract
Summer savory (Satureja hortensis L., Lamiaceae) is a well known medicinal and aromatic plant, native to Southern Europe, Anatolia, Caucasus, Iraq and western Iran, but nowadays it is cultivated worldwide. In order to evaluate the effect of sowing date and plant density on the yield and morphological ...
Read More
Summer savory (Satureja hortensis L., Lamiaceae) is a well known medicinal and aromatic plant, native to Southern Europe, Anatolia, Caucasus, Iraq and western Iran, but nowadays it is cultivated worldwide. In order to evaluate the effect of sowing date and plant density on the yield and morphological characteristics of Satureja hortensis L. a field experiment was conducted in Sary Agricultural University using split-plot design based on randomized complete blocks with three replications during 2010. Main factors were three sowing dates (11 April, 22 April and 3 May) and sub factors were three plant density (15×35, 25×35 and 35×35cm). The species were investigated at full flowering stage. Sowing date and plant density had significant effects on most of the morphological characteristics. According to the results of mean comparison, the highest plant height (52.3 cm), lateral shoot (23.22 N/P), number of nod (17.81), shoot diameter (8.8 mm), root diameter (9.12 mm) and dry weight of root (2.76 g/p) were recorded for first sowing date. Delay in sowing time increased the dry shoot yield significantly as the highest dry shoot yield (3023.1 and 2663.9 kg/ha) was obtained at third and second sowing time. The result of mean comparison showed that the highest root diameter (9.33mm) and dry weight of root (2.56 g/p) were recorded for third density. In addition, the highest plant height (53.03 and 51.09 cm), lateral stem (21.94 and 21.79 N/P), number of nod (17.06 and 16.32) and shoot diameter (7.92 and 7.4 mm) were obtained at third and second densities. Plant density had no significant effect on dry shoot yield. The obtained results showed that morphological characteristics of Satureja hortensis were affected by agronomic treatments and growth performance may be enhanced by proper management.
A. Akbarinia
Abstract
Satureja sahendica Bormn., which is native to Iran, is a medicinal species from Lamiaceae family and its habitat is west of Iran. In a split plot experiment, the effects of nitrogen fertilizer at levels of 0 (control), 40 and 80 kg/ ha (as main plots), and the sowing density of 8, 10 and ...
Read More
Satureja sahendica Bormn., which is native to Iran, is a medicinal species from Lamiaceae family and its habitat is west of Iran. In a split plot experiment, the effects of nitrogen fertilizer at levels of 0 (control), 40 and 80 kg/ ha (as main plots), and the sowing density of 8, 10 and 12 plants /m2 (as sub plots) were studied on height, number of branches per plant, yield and the essential oil yield of aerial parts of S. sahendica. The experiment was carried out in agricultural research farm of Takestan, Islamic Azad University of Iran, during 2009-2011.There was no significant difference in terms of height, number of branches per plant, the yield of flowering shoots and oil content between using 40 and 80 kg/ha nitrogen treatments. However, higher values were recorded for both treatments compared to control. The highest essential oil content and oil yield was obtained by application of 40 kg nitrogen per hectare and using more nitrogen reduced the oil yield. A sowing density of 10 plants per square meter increased aerial part yield and oil yield. The highest yield of flowering shoot, and essential oil yield were obtained by application of 40 kg nitrogen/ha and a sowing density of 12/m2 (2096 kg/ha, 2.1 percent and 44.1 kg /ha, respectively) that showed no significant differences by application of 40 kg nitrogen per hectare and the sowing density of 10 plants /m2.
Sh. Kaveh; H. Zeinali; L. Safaei; H. Madah Arefi; S. Aflakian
Abstract
Thyme is an important medicinal plant of Iran that in order to have thymol and carvacrol using as antimicrobial, antibacterial and antiflatulence agent. In this study 22 genotypes of Thymus kotschyanus Boiss. & Hohen. and Thymus vulgaris L. collected from different regions of Iran and cultivated ...
Read More
Thyme is an important medicinal plant of Iran that in order to have thymol and carvacrol using as antimicrobial, antibacterial and antiflatulence agent. In this study 22 genotypes of Thymus kotschyanus Boiss. & Hohen. and Thymus vulgaris L. collected from different regions of Iran and cultivated as a randomized complete block design with 3 replications in fozveh station of Agricultural and Natural Resource Research Center of Isfahan. Length of flower and buds, spike weight, stem height, leave surface, leave length and width, maximum and minimum cover length, number of flower in spike, spike length, the beginning, 50% and 100% flowering stage, aerial dry and wet yield and essential oil percentage. Thymol and carvacrole percentages were measured with GC and GC/MS. The results showed a genetically variation for all traits in thyme genotypes. The highest production was in Thymus vulgaris with 2200 kg/ha. Thymus kotschyanus from western Azarbayejan had the highest production (1640 kg/ha) among the same population. Essential oil percentage in Thymus kotschyanus was from 0.42 to 2.17% and in Thymus vulgaris from 0.42 to 1.75%. Also Thymol percentage was from 4.63 to 74.52%, and carvacrol from 3 to 78.24% in Thymus kotschyanus and in Thymus vulgaris thymol was from 32.53% to 32.53% and carvacrol from 5.74 to 53.16%. Genotypes were classified into 4 groups. The first group had the highest vegetative period. The second had the maximum amount of Length of buds, spike weight and leave width. Number of spike, thymol percentage and leave width were relatively high in the third group. The forth group had the highest thymol percentage, aerial dry and wet yield and essential oil percentage. Based on the results there was suitable genetically potential for all thyme traits that can use in improvement programs.
L. Safaei; D. Afiuni; H. Zeinali
Abstract
To study correlations between essential oil and essential oil components and determining the role of these traits in variation among 12 genotypes of fennel (Foeniculum vulgare Mill.), an experiment was conducted in a randomized complete blocks design with 3 replications at Fozveh Research Station of ...
Read More
To study correlations between essential oil and essential oil components and determining the role of these traits in variation among 12 genotypes of fennel (Foeniculum vulgare Mill.), an experiment was conducted in a randomized complete blocks design with 3 replications at Fozveh Research Station of Esfahan. The studied traits included seed yield, essential oil percentage, oil yield and oil components. Results of analysis of variance showed significant differences among the genotypes for all traits. Correlation coefficients showed that essential oil yield had a positive significant correlation with essential oil percentage, seed yield, and the percentage of α-pinene, camphene, myrcene, phlandrene, fenchone and camphor. In principal component analysis, the first four components could justify 90% of the total variation. Seed yield, essential oil percentage and yield, and the percentage of α-pinene, camphene, myrcene, phlandrene, fenchone, g-terpinene, E-anetole and camphor had a major role in explaining the first component. In the second component, sabinene, Beta pinene and p-cymene were more important whereas limonene and 1,8-cineole in the third component and methyl cavichol and cis-anethol in the forth component had more importance. Based on the cluster analysis, genotypes of fennel were classified into 4 groups which had noticeable differences, especially for seed yield, essential oil percentage, essential oil yield, and the percentage of α-pinene, fenchone and E-anetole. Consequently, crossing between superior genotypes of different clusters and testing their progeny through breeding and selection programs may result in production of cultivars with desirable essential oil quality.
A. Ehsanipour; K. Razmjoo; H. Zeinali
Abstract
This investigation was carried out to study the effect of different nitrogen rates on yield, yield components and essential oil of several fennel (Foeniculum vulgare Mill.) populations. The experiment design was split plot with three replications conducted during 2008 at Research Farm of Isfahan University ...
Read More
This investigation was carried out to study the effect of different nitrogen rates on yield, yield components and essential oil of several fennel (Foeniculum vulgare Mill.) populations. The experiment design was split plot with three replications conducted during 2008 at Research Farm of Isfahan University of Technology. Nitrogen levels were 0, 40, 80, 120 and 160 N kg/ha as the main plot and four populations of fennel (Isfahan, Tehran, Yazd and 11486) located in subplot. Seed yield, essential oil percentage, 1000-seed weight, biomass, harvest index, number of seeds per umbel, number of umbels per plant, seed length, and plant height were measured. Results showed significant differences for seed yield, 1000-seed weight, harvest index, number of seed per umbel, number of umbels per plant, seed length, plant height and percentage of essential oil among fennel populations. Also, seed yield per ha, 1000-seed weight, number of seed per umbel, seed length, number of umbels per plant and percentage of essential oil significantly differed in different nitrogen levels. There was an interaction effect between N rates and populations for 1000-seed weight, harvest index, number of seed per umbel, seed length, number of umbels per plant and plant height. The highest seed yield per hectare among the populations belonged to Isfahan population, obtained on control and 40 and 160 kg/ha nitrogen fertilization. The highest essential oil percentage was obtained on population of 11486 at 40 kg/ha nitrogen fertilization.
A Habibi; G.H. Heidari; Y. Sohrabi; Kh. Mohamadi
Abstract
In order to study the effect of biofertilizers and chemical fertilizers on yield, yield components, chlorophyll and photosynthesis rate of pumpkin (Cucurbita pepo L.), an experiment was conducted in a randomized complete blocks design with 8 treatments and 3 replications at Research Farm of Kurdistan ...
Read More
In order to study the effect of biofertilizers and chemical fertilizers on yield, yield components, chlorophyll and photosynthesis rate of pumpkin (Cucurbita pepo L.), an experiment was conducted in a randomized complete blocks design with 8 treatments and 3 replications at Research Farm of Kurdistan University in 2009. Treatments included: control (N1), nitroxin (free-living nitrogen fixing bacteria) (N2), phosphate solubilizing bacteria (N3), nitroxin + phosphate solubilizing bacteria (N4), chemical fertilizer (urea 120 kg ha-1 + mono super phosphate 150 kg ha-1) (N5), 50% chemical fertilizer + nitroxin (N6), 50% chemical fertilizer + phosphate solubilizing bacteria (N7), 50% chemical fertilizer + nitroxin + phosphate solubilizing bacteria (N8). Results indicated that the fertilizer treatments had significant effects on chlorophyll, photosynthesis rate, fruit diameter, fruit fresh weight and fruit and seed yield. Maximum seed yield (97.97 gr/m2) was obtained from (N8) treatment and the highest fruit yield (6272.2 and 5790/5 gr/ha), photosynthesis rate (15.56 and 14.05 µmol m-2 s-1 CO2) and chlorophyll (53.06 and 50.08 SPAD values) were obtained from (N8) and (N6) treatments respectively. The fertilizer treatments had no significant effects on the 1000 seed weight and number of fruits per stem. According to the results, it is concluded that application of biofertilizers along with 50% chemical fertilizer could reduce the need for chemical fertilizers and the highest seed and fruit yield would be obtained.
M. Palizdar; B. Delkhosh; A.H Shiranirad; Gh. Noormohammadi
Abstract
In order to study the effect of irrigation regimes and potassium fertilizer yield and yield components of safflower (Carthamus tinctorius L.) as a medicinal plant, a field experiment was conducted in a factorial design based on randomized complete blocks with three replications. The experiment was performed ...
Read More
In order to study the effect of irrigation regimes and potassium fertilizer yield and yield components of safflower (Carthamus tinctorius L.) as a medicinal plant, a field experiment was conducted in a factorial design based on randomized complete blocks with three replications. The experiment was performed on a winter safflower genotype (Goldasht) at the experimental farm of Ghazvin during cropping season 2009-2010. Four irrigation regimes including 60 (Control), 100, 140 and 180mm evaporation from evaporation pan (Class A) and four levels of potassium fertilizer including 0 (Control), 50, 100 and 150 kg.ha-1 comprised the experimental factors. Results showed that with increasing irrigation level, seed yield, plant height, stem diameter, number of branches per plant, head diameter, number of heads per plant and number of seeds per head increased significantly; as the seed yield of the irrigation based on 60mm evaporation was 110% higher than the that of irrigation based on 180mm evaporation. All traits also increased significantly with increasing potassium content. As application of 150kg.ha-1 potassium increased the seed yield by 58% compared to the control treatment. The interaction effect of irrigation and potassium was significant on all traits except stem diameter and head diameter. In irrigation based on 60mm evaporation, application of 150 kg.ha-1 potassium increased seed yield by 35% compared to the control treatment but in irrigation based on 180mm evaporation, it was increased by 130%. According to the results, application of potassium fertilizer showed positive effects on yield and yield components of safflower in sever and moderate water stress conditions.
S.G.R. Mousavi; M.J. Seghatoleslami; E. Ansarinia; H. Javadi
Abstract
In order to study the effect of water deficit stress and different nitrogen levels on seed yield, yield components and water use effeciency of Calendula officinalis L., an experiment was conducted as split plot design based on randomized complete blocks with three replications, at research field of Islamic ...
Read More
In order to study the effect of water deficit stress and different nitrogen levels on seed yield, yield components and water use effeciency of Calendula officinalis L., an experiment was conducted as split plot design based on randomized complete blocks with three replications, at research field of Islamic Azad University of Birjand branch in 2009. In this research water deficit stress set as main factor with three levels (irrigation after 60, 120 and 180 mm evaporation from pan class A) and nitrogen set as sub factor with four levels (0, 60, 120 and 180 kg N ha-1). The results showed irrigation trearments had significant effect (α=1%) on seed yield and it,s components, biological yield, harvest index and water use efficiency for seed and biomass. With incereasing of irrigation intervals from 60 to 180 mm evaporation from pan class A, seed number per capitul, number of capitul per m2, 1000-seed weight, seed yield, number and dry yield of flower decereased 26.6, 49.5, 39.6, 79.3, 65.6 and 72 percent, respectively. The highest biomass yield and weight of one capitul was releated to irrigation after 60 mm evaporation treatment, but irrigation after 60 mm evaporation treatment had the highest WUE. Also the results showed that nitrogen fertilizer trearment affected significantly (α=1%) all traits except capitul number per m2 nitrogen fertilizer application increased these traits, significantly. Interaction of irrigation and nitrogen on all traits was not significant. In conclusion, irrigation after 120 mm evaporation with 120 kg N ha-1 had suitable seed yield with the highest WUE for seed.
M. Hosseinpour; H. Habibi; M.H. Fotokian
Abstract
In order to evaluate the effect of chemical and biological nitrogen on growth and secondary metabolites production of Pimpinella anisum L., a factorial experiment was conducted based on randomized complete block design with three replications. Chemical nitrogen in three levels of 0, 60 and 120 kg/ha ...
Read More
In order to evaluate the effect of chemical and biological nitrogen on growth and secondary metabolites production of Pimpinella anisum L., a factorial experiment was conducted based on randomized complete block design with three replications. Chemical nitrogen in three levels of 0, 60 and 120 kg/ha and biological nitrogen (nitroxin) in three levels of 0, 3 and 6 L/ha were applied as treatments. Results showed that the effect of chemical nitrogen and nitroxin on fertile ombellete/umble, seed yield, essential oil content and essential oil yield, biologic yield, harvest index seed and harvest index essential oil was significant. Means comparisons showed that the maximum (13.1) and minimum (12.2) number of ombellete/umble were respectively recorded for the treatment with 3 l/ha nitroxin and control treatment (without chemical and biological nitrogen). The highest seed yield (872.8 kg/ha) was obtained from 3 L/ha nitroxin and 60 kg/ha chemical nitrogen while the lowest seed yield (478.3 kg/ha) was obtained from control treatment. According to the results, maximum essential oil yield (115.14 kg/ha) was recorded for the treatment of 3 L/ha nitroxin and 60 kg/ha chemical nitrogen, and the minimum oil yield (55.35 kg/ha) was obtained from control treatment.
S. Aflakian; H. Zeinali; H. Maddah Arefy; Sh. Enteshary; Sh. Kaveh
Abstract
Thymus daenensis Celak. is an aromatic and medicinal species which due to hybridization within species and between species has high morphological diversity. This study was carried out in order to evaluate yield and yield components in 11 ecotypes of Thymus daenensis collected from Isfahan, Markazi and ...
Read More
Thymus daenensis Celak. is an aromatic and medicinal species which due to hybridization within species and between species has high morphological diversity. This study was carried out in order to evaluate yield and yield components in 11 ecotypes of Thymus daenensis collected from Isfahan, Markazi and Lorestan. This experiment was performed in a randomized complete blocks design with three replications at Research Center for Agriculture and Natural Resources of Isfahan. Spike weight, spike length, number of flowers per spike, shoot height, leaf area, leaf length, leaf width, the largest and smallest diameter of canopy, 1000-grain weight, fresh and dry yield were measured. Analysis of variance showed that there was considerable variation for all studied characters. Results of mean comparisons showed that the highest dry and fresh yield per plant were 114/6 and 386/6 gr for ecotype of Khorramabad 1, respectively. The lowest yield was recorded for ecotype of Khorramabad 2. Maximum spike weight, spike length, number of flowers per spike, the largest diameter of canopy and leaf length was also recorded for ecotype of Khorramabad1. A positive significant correlation was observed between dry yield per plant and the largest diameter of canopy, leaf length, and fresh yield. Correlation between dry yield per plant and leaf width was strongly negative. Factor analysis introduced three factors that justified 79.71% of total variation among characters. Yield was identified as the first factor including dry yield with positive loading factor and leaf width with negative loading factor. Generally, ecotype of Khorramabad 1 was superior to other ecotypes in terms of yield. Canopy diameter, leaf length and leaf width were also determined as the most effective factors on yield per plant.
A. Kalirad
Abstract
In order to investigate the effect of cultivation date on qualitative and quantitative traits of Cuminum cyminum L. under rainfed conditions, an experiment was conducted in a randomized completely blocks design with five cultivation dates as the treatments and four replications at research station of ...
Read More
In order to investigate the effect of cultivation date on qualitative and quantitative traits of Cuminum cyminum L. under rainfed conditions, an experiment was conducted in a randomized completely blocks design with five cultivation dates as the treatments and four replications at research station of Sirch. Morphological traits and also seed production were recorded. The results showed that all studied traits of cultivation date had significant differences at level of 1% probability. There were also significant differences among all studied traits of the year except flowering date. No significant differences were recorded for the weight of the seed production in different years. According to the results of the mean comparisons, maximum values of the studied traits were recorded for the cultivation date of early February while maximum seed production and seed yield were obtained in 24th February. Therefore, regarding yield production 24th of February was identified as the best date for cultivation. Significant differences of the traits indicate the high variability of the climate conditions in Sirch Research Station.
Z. Nemati Lafmajani; S.R. Tabaei-Aghdaei; M.H. Lebaschi; A.A. Jafari; A. Najafi Ashtiani; M. Daneshkhah
Abstract
In this research, effects of different traits on flower yield of 12 Rosa damascena Mill. accessions from different regions of Iran were analyzed under irrigation (control) and non-irrigation with and without mulch conditions. Randomized complete block designs were applied with three replications at Research ...
Read More
In this research, effects of different traits on flower yield of 12 Rosa damascena Mill. accessions from different regions of Iran were analyzed under irrigation (control) and non-irrigation with and without mulch conditions. Randomized complete block designs were applied with three replications at Research Station of Homand Absard, Damavand, Iran. Flower weight, flower number, flower dry matter percentage, oil percentage, oil yield (per ha), petal weight, plant height and canopy cover were recorded. According to the correlation analysis, flower yield positively correlated with petal weight under non-irrigation with mulch, irrigated (control) and non-irrigation without mulch conditions. The statistical multivariate methods were also applied included multivariate linear regression and path analyses. Using three separate stepwise-regression analysis made it possible to determine the traits with most important impacts on the flower yield, under irrigation (control) and non-irrigation with and without mulch conditions. Flower number, petal weight, oil yield, and oil percentage under non-irrigation without mulch totally explained 91.7% of the variation among genotypes in the regression model. Petal weight, plant cover, and diameter of the species under irrigation (control) totally explained 98.6% of the variation among genotypes in the regression model. Oil percentage, oil yield, petal weight, plant height and flower number per ha under non-irrigation with mulch totally explained 90.6% of the variation among genotypes in the regression model. The results indicated that petal weight has the most direct impact on flower yield based on the path analysis and oil yield showed a negative direct effect on the flower yield under non-irrigation (without mulch) condition. Oil percentage, oil yield, petal weight, plant height and flower number per plant under non-irrigation with mulch, irrigated (control) and non-irrigation without mulch totally explained 95/5% of the variation among genotypes in the regression model. Petal weight had the highest direct impact on flower yield based on the path analysis under irrigation and non-irrigation conditions. Therefore, it is possible to consider petal weight as a magnificent character to improve flower yield of Rosa damascene.