A. Karimi Afshar; Gh. Kiani; H. Najafi; A. Baghizadeh
Abstract
Ajowan (Trachyspermum copticum L.), belonging to the Apiaceae family, is remarked as an important pharmaceutical and economical product. In order to determine the most important traits affecting grain yield, a split plot experiment was conducted in two conditions of irrigation (normal and drought stress) ...
Read More
Ajowan (Trachyspermum copticum L.), belonging to the Apiaceae family, is remarked as an important pharmaceutical and economical product. In order to determine the most important traits affecting grain yield, a split plot experiment was conducted in two conditions of irrigation (normal and drought stress) as the main factor and 36 ecotypes of ajowan, belonging to nine different provinces of Iran, as a sub plot based on a randomized complete block design with two replications in 2015 and 2016 crop year in Kerman. The results of linear multiple regression analysis with stepwise method showed that in drought stress condition, number of umbrellas per plant, number of seeds per umbrella and essential oil yield, and in normal irrigation conditions, biological yield, 1000-seed weight and seed number per umbrella had the highest effect on grain yield, explaining 87% and 99% of the changes, respectively. Based on the results of path analysis, traits including number of umbels per plant under stress conditions and biological yield under normal conditions had the most direct effect on the grain yield and were recognized as the most important components of the grain yield. Therefore, these traits can be considered as main appropriate criteria for facilitating the indirect selection process and evaluating the seed yield potential in ajowan breeding programs.
F. Ahmadi; M. Modarresi; M.A. Kohanmoo
Abstract
Despite the importance of the German chamomile (Matricaria chamomilla L.), as one of the most widely used medicinal plants in the world, there is little information about the genetic variation within and between its populations in Iran. This study was conducted to investigate the genetic diversity of ...
Read More
Despite the importance of the German chamomile (Matricaria chamomilla L.), as one of the most widely used medicinal plants in the world, there is little information about the genetic variation within and between its populations in Iran. This study was conducted to investigate the genetic diversity of 15 chamomile populations based on morphological characteristics in a randomized complete block design with three replications. Height, flower diameter, receptacle diameter, fresh flower weight, dry flower weight, wet biomass, dry biomass, flowering index, essential oil percentage and Chamazulene percentage were analyzed. The populations had a significant difference for all traits (P≤0.01). The phenotypic and genotypic variation was obtained to be more than 60% for dry weight, dry mass and Chamazulene content. Significant values were recorded for the heritability of the traits including percentage of kemazolen (94.04), the wet biomass (93.93), plant height (90.59), flower diameter (86.52), dry flower weight (84.15), and dry biomass (83.08). The highest and lowest yield (kg/ha) were related to Hamedan (9700) and Eurea (753.33) populations, respectively. The highest percentage of Chamazulene and essential oil content were obtained from Dehroud (14.10) and Jam-o-Riz (0.61), respectively. The flower diameter had the highest correlation (0.62) with the percentage of essential oil. Regression analysis for essential oil percentage as the dependent variable was performed and four traits including flower diameter, height, and fresh weight of flower were introduced into the model, explaining 59% of the variation. In the path analysis for essential oil percentage as the dependent variable, the highest direct effect was related to the fresh weight of flower (1.09) and the highest indirect effect was related to the fresh weight of flower (1.06). The cluster analysis grouped the populations into three groups that did not follow geographical distribution.
B. Abbaszadeh; M.H. Assareh; M.R Ardakani; F. Paknejad; M. Layegh Haghighi; S. Meshkizadeh
Abstract
This research was conducted to study the cause and effect of morphological, physiological characters and some elements of camphorosma monspeliaca L. in natural habitat. Plant samples were collected by using 9 sampling plots at full flowering stage. Morphological traits including plant height, number ...
Read More
This research was conducted to study the cause and effect of morphological, physiological characters and some elements of camphorosma monspeliaca L. in natural habitat. Plant samples were collected by using 9 sampling plots at full flowering stage. Morphological traits including plant height, number of tillers, big and small diameter of the canopy cover, dry weight of plant shoots and dry weight of flowering shoots were measured. Soluble sugar content, proline, sodium, potassium, magnesium, calcium, chlorine and iron were also measured by using different methods. Correlation, factor analysis, stepwise and path analysis were used for identifying effective traits on shoot yield and essential oil percentage. The results showed that there was significant positive correlation between total shoot yield with number of tiller (r = 0.96**), canopy diameter 1 (r = 0.84*), canopy diameter 2 (r = 0.86**), flowering shoot yield (r = 0.79*), total chlorophyll 1 (r = 0.77*), chlorophyll b (r = 0.67*) and iron (r = 0.84*). There was significant negative correlation between total shoot yield with soluble sugars (r = -0.80**), proline (r = -0.88**), calcium (r = -0.70*) and chlorine r = -0.94**). Significant positive correlation was observed between flowering shoot yield with number of tillers, canopy diameters1 and 2, essential oil percentage, total chlorophyll 1 and iron. Essential oil percentage showed significant positive correlation with number of tiller (r = 0.79*), canopy diameters 1 (r = 0.79*), canopy diameters 2 (r = 0.83**), total shoot yield (r = 0.76*) and shoot flowering yield (r = 0.84**) shoot yield and iron (r = 0.86**). The results of factor analysis showed that first component with number of tillers, big and small canopy diameters, total shoot yield, flowering shoot yield, essential oil percentage and iron could justify more than 55% of total variance. The result of stepwise analysis on dependent variable (essential oil percentage) showed that iron and total shoot yield with a determination coefficient of 0.8048 were entered to the regression model. The result of path analysis showed that iron had the highest direct positive effect on essential oil percentage. According to the results of stepwise analysis, number of tillers and plant height were entered to the regression model. The result of path analysis showed that number of tiller had the highest direct positive effect on total shoot yield.
H. Keneshloo; H. Mirzaie-Nodoushan; F. Asadicorom; U. Achak
Abstract
Moringa peregrina (Forssk.) Fiori is one of the neglected Moringa species which is growing in a wide area of southeast part of Iran. The research was carried out by studying seedling growth parameters on 310 Moringa peregrina seedlings to investigate interrelationship between the growth parameters and ...
Read More
Moringa peregrina (Forssk.) Fiori is one of the neglected Moringa species which is growing in a wide area of southeast part of Iran. The research was carried out by studying seedling growth parameters on 310 Moringa peregrina seedlings to investigate interrelationship between the growth parameters and their possible effects on seedling growth. Therefore, seed was collected from 21 single plants of the species across its habitats in southeast part of the country. Seedlings were grown in greenhouse conditions on which several seedling growth parameters were recorded after seedling establishment. The recorded data were analyzed based on completely randomized design model to assess the differences between the mother plants. To confirm the differences between the sampled single trees, all the possible paired correlation coefficients were estimated. To select the parameters specified by multiple regression analysis, path analysis was performed to investigate the direct and indirect relations between the independent parameters and plant height as the dependent parameter. Principal components analysis was also used to assess the interrelationship between the growth parameters. To classify the progenies of the single plants, the first and second components of the analysis were plotted and the results of the plot were compared to the results of cluster analysis. All the recorded traits showed a significant positive correlation with seedling height. Dividing the phenotypic correlation to the direct and indirect effects revealed that several traits affect the dependent parameters positively direct and negatively indirect, through other recorded growth parameters. Traits such as leaflet width with a positive simple correlation to the seedling height, showed a negative direct effect on the dependent parameter.
Z. Nemati Lafmajani; S.R. Tabaei-Aghdaei; M.H. Lebaschi; A.A. Jafari; A. Najafi Ashtiani; M. Daneshkhah
Abstract
In this research, effects of different traits on flower yield of 12 Rosa damascena Mill. accessions from different regions of Iran were analyzed under irrigation (control) and non-irrigation with and without mulch conditions. Randomized complete block designs were applied with three replications at Research ...
Read More
In this research, effects of different traits on flower yield of 12 Rosa damascena Mill. accessions from different regions of Iran were analyzed under irrigation (control) and non-irrigation with and without mulch conditions. Randomized complete block designs were applied with three replications at Research Station of Homand Absard, Damavand, Iran. Flower weight, flower number, flower dry matter percentage, oil percentage, oil yield (per ha), petal weight, plant height and canopy cover were recorded. According to the correlation analysis, flower yield positively correlated with petal weight under non-irrigation with mulch, irrigated (control) and non-irrigation without mulch conditions. The statistical multivariate methods were also applied included multivariate linear regression and path analyses. Using three separate stepwise-regression analysis made it possible to determine the traits with most important impacts on the flower yield, under irrigation (control) and non-irrigation with and without mulch conditions. Flower number, petal weight, oil yield, and oil percentage under non-irrigation without mulch totally explained 91.7% of the variation among genotypes in the regression model. Petal weight, plant cover, and diameter of the species under irrigation (control) totally explained 98.6% of the variation among genotypes in the regression model. Oil percentage, oil yield, petal weight, plant height and flower number per ha under non-irrigation with mulch totally explained 90.6% of the variation among genotypes in the regression model. The results indicated that petal weight has the most direct impact on flower yield based on the path analysis and oil yield showed a negative direct effect on the flower yield under non-irrigation (without mulch) condition. Oil percentage, oil yield, petal weight, plant height and flower number per plant under non-irrigation with mulch, irrigated (control) and non-irrigation without mulch totally explained 95/5% of the variation among genotypes in the regression model. Petal weight had the highest direct impact on flower yield based on the path analysis under irrigation and non-irrigation conditions. Therefore, it is possible to consider petal weight as a magnificent character to improve flower yield of Rosa damascene.
H. Zeinali; S.R. Tabaei Aghdaei; M. Asgarzadeh; A. Kiyanipor; M. Abtahi
Volume 23, Issue 2 , August 2007, , Pages 195-203
Abstract
In order to evaluate the relationship of flower yield per plant and yield components in Rosa damascene Mill., an experiment was conducted in a Complete Randomized Block Design with three replications and with 35 genotypes of Rosa damascena, in Kashan dry land and desert research station. Fourteen characters ...
Read More
In order to evaluate the relationship of flower yield per plant and yield components in Rosa damascene Mill., an experiment was conducted in a Complete Randomized Block Design with three replications and with 35 genotypes of Rosa damascena, in Kashan dry land and desert research station. Fourteen characters of morphological and yielding were measured. Flower yield per plant exhibited a significant positive correlation with fresh weight of flower, flower yield per branch, number of flower per branch and plant height, but with bud length had a significant negative correlation. Result of stepwise regression analysis for flower yield per plant showed that fresh weight per flower and number of flower per plant entered the model, respectively, and justified 90 percent of total variation of flower yield per plant. Factor analysis revealed 5 factors which justified 83.2 percent of the total variation among characters. In the first factor, traits of number of flowers per branch, flower yield per branch, canopy diameter, number of flower per plant, length of receptacle and flowering time had greater loadings and was named flower yielding factor. Path analysis showed that number of flower per plant, fresh weight of flower and flower yield per stem had the highest direct effects on flower yield per plant, therefore, this research suggest the number of flowers per plant, fresh weight per flower and number of flowers per branch can be good selection criteria for improving flower yield per plant in Rosa damascene.
